Skip to Content

Custom Reference Standards

ICP Quality Control Standards

Explore our Peak Performance™ ICP quality control standards for ICP-MS and ICP-OES method verification, interference checks, instrument performance checks, calibration verification, and laboratory QC. CPI standards are prepared in compliance with strict production standards from high quality ingredients, sub-boiling distilled acids, and 18-mega-ohm de-ionized water.  

We also offer custom standards to reduce workload and increase efficiency in laboratories. Read our guide to ICP standards and inorganic reference standards, including their use in ICP-MS and ICP-OES calibration, quality control and elemental analysis.

Enroll in our AssuredSupply Lab Supply Program and relax in the knowledge that you'll never run out of your critical standards or lab supplies again! 


Contract Required Detection Limit (CRDL) Standard, HNO3,0mL
Item No.: 4400-CRDL1-100
See Product Description for full details.
303.00 303.0 USD
Complete Control Laboratory Program (CLP) Set, 13 x 100 mL
Item No.: 4400-CLP-SET
See Product Description for full details.
2,051.00 2051.0 USD
Instrument Check Standard #1, HNO3, 100 mL
Item No.: 4400-CALMX1-100
Al 10, B 10, Ba 1, Be 1, Ca 1, Ni 10, P 100, Sc 1, Zn 10 in 2% HNO3.
154.00 154.0 USD
Instrument Check Standard #2, HNO3, 100 mL
Item No.: 4400-CALMX2-100
Ba 50, Be 20, La 20, Mn 20, Ni 20, Sc 20, Zn 20 in 2% HNO3.
137.00 137.0 USD
Instrument Check Standard #4, HNO3, 100 mL
Item No.: 4400-CALMX4-100
Al 10, As 10, Ba 1, Cu 10, K 50, Mn 10, Na 10, Ni 10, P 10, Pb 10, Sc 10, Zn 10 in 2% HNO3.
272.00 272.0 USD